Current and future solid waste management system in Northern Viet Nam with focus on Ha Noi: climate change effects and landfill management

The contribution investigates the solid waste management system in Ha Noi under consideration of the interrelation between climate change effects and landfill management by means of a cause-and-effect-analysis as well as water balances using the HELP 3.95 model and gas emission data, followed by a Strength, Weakness, Opportunities, Threats (SWOT) analysis. Even landfills are sources of methane (CH₄) emissions they are also impacted by climate change. The main effects on landfill sites are the change of climatic conditions, namely the regional water balance, extreme precipitation and storm events. The results of the water balance model results show that a geomembrane surface sealing can reduce the leachate formation significantly, a fact that is also valid for the climate change scenario with higher precipitation. The risk of flooding and erosion at the landfill sites increases, which will require a customized water management. In parallel landfill gas offers the opportunity for recovery of Greenhouse Gases (GHG) and the generation of renewable energy. Some further management options are wind turbines, photovoltaic systems or biomass for biogas conversion, which was grown on closed landfill sites. The inclusion of climate friendly management options of closed landfills in a “Good Landfill Aftercare Practice” is recommended.     

The influence of the level of definition of functional specifications on the environmental performances of a complex system. EcoCSP approach

The tendency towards a homogenous mode of development modelled on that of Western countries means that sustainable development has become increasingly urgent. It is necessary to thoroughly redefine products and their expected performances in such a way that the consequences are compatible with sustainable development. In the domain of product design, this means that it is no longer sufficient to use assessment tools “after the fact” to check the impact of products whose functional unit (FU) was defined prior to production; it is now necessary to rethink the definition of the FU itself. This article aims to present an approach based on a combination of life cycle analysis methods and problem-solving by constraint satisfaction. This original approach makes it possible to vary the design of the different dimensions of the FUs of a complex system and thus to make it easier to identify the best architecture along with the best functional definition of the system. In this study, the EcoCSP approach is applied to define the functional performances of an ecological passenger ferry. The complexity of couplings between subsystems and the sheer number of those subsystems mean that the designer has to use “intelligent” tools. These simulate a great number of scenarios and help him/her to fine-tune the system and make the right technological choices with regard to the right functional specifications.     

Dietary exposure to polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and polychlorinated biphenyls of the French population: Results of the second French Total Diet Study

Polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) bioaccumulate through the food chain and are therefore of public health concern. Exposure to these compounds was assessed in the second French Total Diet Study (TDS). Food samples (n=583) were collected to be representative of the whole diet of the population, prepared as consumed, and analyzed. Contamination data were combined with national individual food consumption data. Mean exposure (95th percentile) to PCDD/F+DL-PCBs was assessed to be 0.57 (1.29) pg TEQ(WHO-98) (kg bw)(-1) d(-1) in the adult population and 0.89 (2.02) pg TEQ(WHO-98) (kg bw)(-1) d(-1) in the child and teenager population. Less than 4% of the population exceeded the health-based guidance value for PCDD/F+DL-PCBs. Mean exposure (95th percentile) to the six indicator PCBs (PCB 28, 52, 101, 138, 153, 180) was estimated at 2.71 (7.90) ng (kg bw)(-1) d(-1) in the adult population and 3.77 (11.7) ng (kg bw)(-1) d(-1) in the child and teenager population. Only 2.6% of the adults [CI(95%): 1.9; 3.3] and 6.5% of the children and teenagers [5.2; 7.8] exceeded the health-based guidance value for total PCBs. These results show that the contamination levels in food and therefore the exposure of the general French population to PCDD/Fs and PCBs have declined (by a factor of 3.2 for PCDD/F+DL-PCBs and about three for total PCBs) since the last evaluation, which was conducted using another methodology in 2005 and 2007, and show the efficiency of the European risk management measures which came into force after these evaluations.     

Does intensity of change matter? Factors affecting adoption of agri-environmental schemes in Spain

Agri-environmental schemes (AES) are the main policy instrument currently available in the EU to promote environmentally-friendly farming practices. However, the rate of adoption of these measures is still relatively low in southern Europe, and understanding how these rates can be increased is still an open issue. The goal of this paper is to increase that understanding by testing whether the factors which determine AES sign-up decisions are influenced by the intensity of change in farming practices that are brought about by adopting the scheme. A micro-economic model reflecting farmer AES sign-up decisions is proposed and applied to two schemes in Spain respectively requiring major or minor intensity of change in practices by surveying farmers eligible for both schemes. The results show that farm structural factors play a role when major practice change is required by the scheme, yet when dealing with minor change, individual farmer characteristics play a more determining role. Social capital and farmer attitude are important factors in both the AES surveyed. Therefore, it may be concluded that improving agronomic design would be an important tool to improve farmer participation in AES where major change is involved, whereas improved targeting and extension would help uptake for AES involving a lesser degree of change.     

利用废旧锌锰电池制备光催化剂净化甲苯

针对废旧锌锰电池回收利用难,以及光催化剂 TiO2活性低的问题,以废旧锌锰电池和商业二氧化钛为原料,通过球磨法制备了新型复合光催化剂.在紫外光灯照射下,进行了废旧锌锰电池复合改性TiO2对甲苯的光催化氧化实验,并重点探究空速、光照强度、相对湿度和氧气体积分数等关键实验条件对甲苯净化效率的影响.结果表明,改性后的催化剂对甲苯的净化能力大幅提高;当TiO2与废电池芯粉的质量比为2:1时,催化剂的催化效果最好,甲苯的净化效率提高了近45％;空速越大,催化剂对甲苯的净化效率越低;净化效率随光照强度的增加呈现先增加后保持不变的规律;催化剂在相对湿度为30％的条件下具有最佳的催化活性,氧气体积分数为15％时为净化效率达到最大.本研究结果可为废旧锌锰电池的回收利用提供新的思路.     

三峡库区小流域不同土地利用类型“土壤-水体”氮磷含量特征及其相互关系

利用长期田间监测数据,分析了三峡库区典型农业小流域不同土地利用类型土壤、浅层地下水氮磷含量分异特征,剖析了坡面土壤氮磷含量与浅层地下水、坡面地表径流氮磷浓度的相互关系.结果表明梯田的土壤TN平均含量显著(P0.05)高于坡耕地,水田梯田平均含量1.49 g·kg~(-1)最高;旱地坡耕地和桑树套种坡耕地土壤TP平均含量显著高于其它地类;旱地梯田土壤NO_3~--N平均含量最高,离散程度最大.坡面土地利用类型对浅层地下水TN、NO_3~--N浓度影响较大,但对TP浓度影响较小;流域浅层地下水TN浓度与NO_3~--N浓度呈极显著正相关,不同坡面浅层地下水NO_3~--N对TN平均贡献率在67.82%~78.51%之间;浅层地下水TN、NO_3~--N月平均浓度变化规律基本一致,春秋两季农作物施肥后均呈现明显上升趋势.坡面土壤TN平均含量与浅层地下水TN浓度呈显著指数关系,坡面土壤NO_3~--N平均含量与浅层地下水NO_3~--N浓度呈对数关系,但与坡面地表径流TN、NO_3~--N浓度无显著相关性;当坡面地表径流TP浓度0.1 mg·L~(-1)时,坡面土壤TP平均含量与其呈显著线性相关;坡面地表径流与浅层地下水TN、NO_3~--N浓度均呈显著幂函数关系,且NO_3~--N相关性更好.     

燃煤电厂烟塔合一排烟风洞试验与数值模拟对比分析

近年来,燃煤电厂烟塔合一烟气排烟对近距离环境影响的不确定性,使其在国内的推广过程受到一定限制。准确判断烟塔合一排烟的环境影响,对于我国现有燃煤电厂烟气污染物的排放有着巨大的工程价值和明显的现实意义。利用国家环境保护某重点实验室中风洞试验平台,对燃煤电厂烟塔合一烟气污染物在近距离的扩散和传输行为,进行物理风洞试验以及数值模拟计算,并进行对比分析。结果表明:德国Austal2000模式的浓度预测并不精确;数值风洞也有其差异性,而物理风洞的结果在很大程度上符合现有的理论及国内工程实际。     

Arsenic biotransformation and an arsenite S-adenosylmethionine methyltransferase in plankton

<正>Arsenic(As)is a well-recognized toxicant and carcinogen.Chronic exposure to inorganic arsenic causes a range of human cancers(e.g.,skin,bladder,and lung)and increases the risk of developing diabetes,hypertension,and cardiovascular and neurological diseases.The prevalence of arsenic species and the severity of their health effects continue to drive and demand for extensive research(Carlin et al.,2016).     

紫外分光光度法测定海水中石油类的不确定度评定

对紫外分光光度法测定海水中石油类浓度进行了不确定度评定。通过对标准溶液、标准工作曲线拟合、前处理过程等影响测定结果的不确定度分量进行分析,计算出测定结果的扩展不确定度,并找出影响该不确定度的主要因素。结果表明,紫外分光光度法测定海水中石油类浓度的不确定度的主要来源是实验中前处理过程的不确定度,本次实验所测海水中石油类浓度的不确定度报告为19.98±1.326 mg/L。